页轮干式磨削Ti6Al4V合金

进行了Ti6A14V合金锆刚玉页轮和碳化硅页轮的磨削性能试验研究，分析了磨削用量对磨削力、磨削温度和磨削表面完整性的影响。磨削力通过KISTLER9265B测力仪测定，磨削表面温度由NIUSB-621X信号采集系统测得，磨削表面形貌和金相组织由HiroxKH-7700型体视显微仪和Quanta200型扫描电镜（SEM）观察，表面粗糙度由Mahr Perthometer M1粗糙度仪测得，表层显微硬度通过HVS—1000硬度计测定。研究结果表明：页轮磨削钛合金工件表面没有发生烧伤现象，磨削热影响区厚度小于50μm，锆刚玉页轮比碳化硅页轮更适合干式磨削钛合金。     

推广使用REM37BY电嘴

在我院使用的活塞发动机飞机中,点火系统故障率居高不下,其中又以电嘴积铅带来的发动机抖动故障居多。本文通过对比分析,以及实际监控使用的具体情况,证明了REM37BY电嘴能使这一故障大大减少,并且能节约成本,缩短工时,具有较大的推广价值。     

基于信任值的P2P网络访问控制模型

对等网络（P2P）已成为一个非常受欢迎的信息交流的新模式。然而,P2P网络环境的分散的和匿名的特点使得对共享信息的控制变得更加困难,而这是无法通过传统的访问控制方法完成的。首先提出P2P网络环境中的访问控制需求,然后提出了一种基于信任值的P2P网络的访问控制模型。模型整合了信任和推荐模式、公平参与原则和访问控制模式,并将其应用于P2P文件共享系统。仿真分析表明,访问控制模型能够有效识别恶意节点,使P2P网络中合作节点具有较高的成功请求率。     

A broad climatology of very high latitude substorms

Magnetic data from a newly commissioned Indian Antarctic station Bharati (corrected geomagnetic (CGM) coordinates 74.7°S, 97.2°E) and closely-spaced IMAGE chain observatories (∼100° magnetic meridian in Northern hemisphere) has been analyzed to study the climatology of substorms which were localized poleward of the standard auroral oval. We considered four austral summers (year 2007–2010) when data from Bharati was available. Several very high latitude substorms were observed in this duration when the solar activity remained unexpectedly low for a long time. Various features of very high latitude substorms, e.g., local time dependence, interplanetary state, hemispherical asymmetry and their nightside low latitude signatures are examined. Events studied here, suggested the following properties of substorms occurring at very high latitudes: (1) maximum occurrence was observed near magnetic midnight (21:00–02:00 MLT). (2) In contradiction to earlier reports, many substorms were observed even during negative IMF Bz condition. In addition, majority of substorms occurred during low or moderate solar wind streams. (3) Magnetic signatures were often pronounced in the winter hemisphere. (4) Even if widely used standard AE indices fail to monitor very high latitude substorms, their low latitude signatures are often evident.     

Fatigue crack propagation of new aluminum lithium alloy bonded with titanium alloy strap

A new type of aluminum lithium alloy (Al-Li alloy) Al-Li-S-4 was investigated by test in this paper. Alloy plate of 400 mm · 140 mm · 6 mm with single edge notch was made into samples bonded with Ti-6Al-4V alloy (Ti alloy) strap by FM 94 film adhesive after the surface was treated. Fatigue crack growth of samples was investigated under cyclic loading with stress ratio (R) of 0.1 and load amplitude constant. The results show that Al-Li alloy plate bonded with Ti alloy strap could retard fatigue crack propagation. Retardation effect is related with width and thickness of strap. Flaws have an observable effect on crack propagation direction.     

Variation in the ionospheric propagating factor M(3000)F2 at Ouagadougou,Burkina Faso

We use hourly monthly median values of propagation factor M(3000)F2 data observed at Ouagadougou Ionospheric Observatory (geographic12.4°N, 1.5°W; 5.9^o dip), Burkina Faso (West Africa) during the years Januar1987–December1988 (average F10.7 < 130 × 10⁻²² W/m²/Hz, representative of low solar flux conditions) and for January 1989–December1990 (average F10.7 ? 130 × 10⁻²² W/m²/Hz, representative of high solar epoch) for magnetically quiet conditions to describe local time, seasonal and solar cycle variations of equatorial ionospheric propagation factor M(3000)F2 in the African region. We show that that seasonal trend between solar maximum and solar minimum curves display simple patterns for all seasons and exhibits reasonable disparity with root mean square error (RMSE) of about 0.31, 0.29 and 0.26 for December solstice, June solstice and equinox, respectively. Variability Σ defined by the percentage ratio of the absolute standard deviation to the mean indicates significant dissimilarity for the two solar flux levels. Solar maximum day (10–14 LT) and night (22–02 LT) values show considerable variations than the solar minimum day and night values. We compare our observations with those of the IRI 2007 to validate the prediction capacity of the empirical model. We find that the IRI model tends to underestimate and overestimate the observed values of M(3000)F2, in particular, during June solstice season. There are large discrepancies, mainly during high solar flux equinox and December solstice between dawn and local midnight. On the other hand, IRI provides a slightly better predictions for M(3000)F2 between 0900 and 1500 LT during equinox low and high solar activity and equinox high sunspot number. Our data are of great importance in the area of short-wave telecommunication and ionospheric modeling.     

The BOSS and BIOMEX space experiments on the EXPOSE-R2 mission: Endurance of the desert cyanobacterium Chroococcidiopsis under simulated space vacuum,Martian atmosphere,UVC radiation and temperature extremes.

The proposed space experiments BOSS (Biofilm Organisms Surfing Space) and BIOMEX (BIOlogy and Mars experiment) will take place on the space exposure facility EXPOSE-R2 on the International Space Station (ISS), which is set to be launched in 2014. In BOSS the hypothesis to be tested is that microorganisms grown as biofilms, hence embedded in self-produced extracellular polymeric substances, are more tolerant to space and Martian conditions compared to their planktonic counterparts. Various microbial biofilms have been developed including those obtained from the cyanobacterium Chroococcidiopsis isolated from hot and cold deserts. The prime objective of BIOMEX is to evaluate to what extent biomolecules are resistant to, and can maintain their stability under, space and Mars-like conditions; therefore a variety of pigments and cell components are under investigation to establish a biosignature data base; e.g. a Raman spectral library to be used for extraterrestrial life biosignatures. The secondary objective of BIOMEX is to investigate the endurance of extremophiles, focusing on their interactions with Lunar and Martian mineral analogues. Ground-based studies are currently being carried out in the framework of EVTs (Experiment Verification Tests) by exposing selected organisms to space and Martian simulations. Results on a desert strain of Chroococcidiopsis obtained from the first set of EVT, e.g. space vacuum, Mars atmosphere, UVC radiation, temperature cycles and extremes, suggested that dried biofilms exhibited an enhanced survival compared to planktonic lifestyle. Moreover the protection provided by a Martian mineral analogue (S-MRS) to the sub-cellular integrities of Chroococcidiopsis against UVC radiation supports the endurance of this cyanobacterium under extraterrestrial conditions and its relevance in the development of life detection strategies.     

储氢合金的性质及发展趋势

本文介绍了储氢合金的性质，Ｎｉ－ＭＨ电池原理，以及储氢合金对Ｎｉ－ＭＨ电池所产生的影响，根据目前科学技术的发展以及市场的需求，提出了未来储氢合金及Ｎｉ－ＭＨ电池的发展趋势。     

一种便携式多通道精密测温仪

介绍了利用数字式温度传感器 DS1 6 2 4构成的多路温度测量仪器。它具有线路简单 ,测量精度高的优点 (在 - 5 5～ 1 2 5°C内 ,精度优于 0 .0 5°C) ;带有计算机接口 ,能够实现长时间连续测量。     

电离层顶部电子含量对GNSS电离层层析的影响分析

卫星信号射线上的总电子含量(slant total electron content, STEC)是像素基全球卫星导航系统电离层层析(computerized ionospheric tomography, CIT)建模的必要数据来源，但电离层层析通常忽略1 000 km以上的顶部电子含量，为弄清这部分电子含量对层析结果的影响，利用NeQuick2模型计算站星视线上的STEC与其在电离层区域内的STEC比值来改正原始数据，并分别利用改正前后的STEC进行电离层层析。结果显示，电离层顶部电子含量占比约为10%，白天占比略大于黑夜，与测高仪站的数据相比，改正后的均方根值比改正前提高了20%以上；与Swarm卫星提供的电子剖面数据对比，改正后的层析结果精度较改正前提升了19.6%左右，且该方法受地磁扰动影响较为明显。总的来说，利用CIT进行小尺度电离层探测，可较直观地看出，顶部电子含量对层析结果的影响较大，需要采取相应手段予以剔除。